Machine Cast
![]() |
![]() Unique Color 10 Wraps Coils Cast Iron Tattoo Shader Machine Gun Supplies US $11.74
|
![]() PROFESSIONAL Shader Tattoo Machine Cast Iron USA DV8 US $34.95
|
| Powered by phpBay Pro |

Can someone help to change the water filer of my Samsung washing machine (fully-automatic, front-loading)?
My machine is old, I lost the guide-book. There is written "QuickSensor P805J 800" on front of the machine. No the machine doesn't work properly, and I cast doubt on that it can be due to water filer. So I want to find the filer and maybe clean or change. Please help me. Thanks in advance.
Front loaders are much more difficult to work on than top loaders, and in fact can contain heavy balancing weights. Be very careful it you try to maneuver one and use a trolley to lift, move and use as a base to work on it.
Most importantly NEVER work on any machine connected to the power source.....that can be FATAL.
It is not easy to determine what it is that your machine is NOT doing properly from how you phrase your question.
So assuming that water wont go into it...then the first thing to check is the water inlet valve where the water goes in to your machine. These get blocked or fail mechanically or electrically or both with age. You will need to replace the valve with one same as original or at least with the same operating voltage and phsysical size.
If you only use Cold water washing normally, you will probably find that the HOT water inlet valve still works fine. You can check that by setting the machine for HOT ONLY wash. If the Hot valve is ok you can swap it over with the faulty cold valve to solve the problem...but you will still need to have BOTH valves fitted for the machine to work properly.
Look......I could go on guessing and suggesting and that would be counter productive as you may not be technically competent to be able to work SAFELY on electrical equpment or interpret my instructions as a Technician would.
I suggest that if your preliminary attempt to fix it fails that you take the plunge and have a Techo check it for a set inspection fee ...say $25 or so...at least you can find out for that if it is worth the price of a full and proper repair.


US $16.79






































































Leave a Reply